Toyota 4Runner Accessories (1996-Current)

Overview:Lower Link Mount Reinforcement Skids for 1996–2002 4Runner, built to strengthen rear lower link brackets and accommodate high-articulation...

Overview:Strut Tower Reinforcement Kit for 1996–2002 4Runner, designed to prevent upper mount cracking under extreme compression loads. Provides st...

Overview:Heavy-duty ditch light brackets designed for 3rd Gen 4Runners and 1st Gen Tacomas. Enables mounting of pod lights along the A-pillars for ...

Overview:Lower Link Mount Reinforcement Skids for 2003–2024 4Runner, engineered to fortify rear lower link brackets and provide clearance for high-...

Overview:Lower Shock Mount Reinforcement Kit for 2003–2024 4Runner, designed to strengthen the factory rear shock mounts prone to bending on 120/15...

Overview:Weld-on Panhard Correction Kit for 1996–2002 4Runner, designed to correct panhard bar geometry on 2–4.5" lifts. Restores factory axle alig...

Overview:This CB Antenna Mount is engineered specifically for 3rd Gen 4Runners to provide a strong, reliable mounting point for rear-mounted CB ant...

Overview:The Hybrid Front Bumper DIY Kit for 4th Gen 4Runners is a weld-together bumper kit designed for serious off-road builds. Its hybrid steel ...

Overview:The Prerunner Front Bumper is a lightweight, race-inspired steel bumper for 3rd Gen 4Runners designed for high-speed desert and off-road u...

Overview:The Plate Front Bumper DIY Kit is a heavy-duty, weld-it-yourself solution for 3rd Gen 4Runners, designed for maximum strength, trail funct...

Overview:The Closed Wing Hybrid Front Bumper is a fully welded steel bumper for 3rd Gen 4Runners, built to balance strength, weight, and aggressive...

Overview:Weld-on Fuel Tank Relocation Mounts for 1996–2002 4Runner, engineered to support installation of an F150 auxiliary fuel tank in the rear s...

Overview:This custom 3rd Brake Light Cover is designed for 3rd Gen 4Runners equipped with a factory spoiler. It fits over the rear spoiler's brake ...

Overview:These 42" Curved Light Bar Brackets are built for 3rd Gen 4Runners and 1st Gen Tacomas, allowing secure roofline mounting of a curved LED ...

Overview:These 50" Curved Light Bar Brackets are built specifically for 4th Gen 4Runners, allowing for secure roofline mounting of a curved LED lig...

Overview:The Alpha Front Bumper DIY Kit is a precision-engineered, weld-together steel bumper for 3rd Gen 4Runners, built for aggressive styling an...

Overview:The Alpha Front Bumper is a fully welded, heavy-duty steel bumper for 3rd Gen 4Runners that combines bold styling with advanced lighting i...

Overview:The Tire Carrier Swingout DIY Kit is designed for integration with the 1996–2002 4Runner rear bumper, providing a weld-together solution f...

Overview:The Hybrid Front Bumper for 4th Gen 4Runners delivers off-road performance with a high-clearance, lightweight hybrid design. Fully welded ...

Overview:Lower Control Arm Reinforcement Kit for 1996–2002 4Runner, developed to strengthen the factory lower control arms at the ball joint end. P...

Overview:Upper Link Reinforcement Kit for 1996–2002 4Runner, designed to strengthen the factory upper link mounts and provide clearance for large a...

Overview:The Open Wing Hybrid Front Bumper is a fully welded, high-clearance steel bumper for 3rd Gen 4Runners. Its open-wing hybrid design improve...

Overview:The Open Wing Hybrid Front Bumper DIY Kit is a weld-it-yourself high-clearance bumper for 3rd Gen 4Runners, featuring a lightweight hybrid...

Overview:This steel skid plate is designed for precise fitment on 3rd Gen 4Runners using a laser-scanned model of the front end. It offers dependab...

Overview:Weld-on Panhard Correction Kit for 2003–2024 4Runner, engineered to correct panhard bar geometry on 2–4.5" lifts. Restores axle alignment ...

Overview:These raw steel rock sliders are a weld-on kit built for 3rd Gen 4Runners, offering serious underbody protection and side impact resistanc...

Overview:The Closed Wing Hybrid Front Bumper DIY Kit is a precision-fit, weld-together bumper for 3rd Gen 4Runners that blends enclosed steel wings...

Overview:DIY High Clearance Rear Bumper Kit for 1996–2002 4Runner, engineered for maximum departure angle, integrated recovery strength, and compat...

Overview:The Plate Front Bumper is a fully welded, high-strength steel bumper for 3rd Gen 4Runners, designed for off-road use and extreme durabilit...

Overview:The DIY Grille Kit for 3rd Gen 4Runners is a laser-cut steel grille insert that transforms the front end with optional integrated cube lig...

Beef up your factory 05-2023 Tacoma,  03-2024 4Runner, GX470/460 non KDSS LCAs with our heavy-duty skid plates.  Simple bolt on installation with h...

Features Bends to match and complement body lines Bare bumper is approximately 115 lbs. Shackle mounts included Lighting: fits 2"x3" flush mount...

Features Bare bumper is approximately 105 lbs. Shackle mounts included Fits most 10k winches Pod lighting: Brackets for 6 pod lights, 3 per side L...

Features Bends to match and complement body lines Bare bumper is approximately 115 lbs. Shackle mounts included Lighting: fits 2"x3" flush mount...

Tired of that exposed keyhole ruining your interior's clean look? Our Glove Box Keyhole Cover is a precision-cut vinyl overlay designed to sit flus...

Enhance your 4Runner's protection from the elements with our newly designed Ark Splash Guards. These are a key feature of our cutting-edge KDSS and...

The Inspired Overland Carbon Fiber Crossbar Kit is designed for customers who want to enhance the versatility of their carbon fiber rooftop tent by...

Upgrade your outdoor adventure with our versatile Shower Awning, designed to provide privacy and convenience no matter where your journey takes you...

Expand your outdoor setup with the Inspired Overland Awning Side Tent, designed to transform your awning into a fully enclosed, multifunctional spa...

The Carbonlite is our award-winning lightweight rooftop tent, built for strength, simplicity, and real-world use. Weighing just 80 pounds, it featu...

The Inspired Overland Compact Camp Table features a roll-top surface that sets up in seconds and packs down just as easily. Its adjustable legs let...

The XL rooftop tent builds on the same award-winning platform as our 76-pound Standard tent — just with a larger footprint. It’s designed for those...

The Inspired Overland Protective Cover shields your rooftop tent from elements and whatever the trail throws at you. Whether you’re navigating rugg...

At just 76 pounds, this SEMA award-winning rooftop tent is built for those who want a true lightweight solution without giving up durability. No fr...

For 4Runner owners who build their rigs with purpose, ReadyLIFT’s new 3" SST3.3 Premium Suspension System (PN 62-55365) delivers the capability, co...

Unlock true open-air adventure and all-season utility with the Softopper® Toyota 4Runner soft top, engineered specifically for classic first-gene...