3rd Gen 4Runner Accessories

Alu-Cab's canopy table mount kit is the perfect canopy accessory to store your Alu-Cab table inside your canopy. With mounting, to the ceiling of t...

The ultimate all-in-one solution for mobile kitchens is here! The kit contains all the essentials required while on the go, including cookware, ute...

The Recovery Trax Tray can mount to either your roof rack, roof box or the side of your vehicle, depending on available space. The tray can hold up...

Heavy-Duty D-Ring Shackle Mount – 1” Steel Built for Strength These are the same D-Rings used on all DRT Fabrication Hybrid and Plate Front Bumpers...

Introducing the NEW RotopaX 2 Gallon. Same capacity and dimensions as our original 2 Gallon - without the complicated twisting bottom! For those th...

For Class V hitch receivers. Our truck owners asked and we listened - NO NEED TO SLEEVE Class V hitch receivers to weaker Class III and Class IV. F...

The Rubber Guard is a synthetic rubber gasket that separates the ProLink and the fairlead by a high durometer rubber material. The rubber guard fea...

The Flatlink Multimount is designed for difficult off-camber vehicle recovery scenarios where two different winch pull directions are often necessa...

The ProLink is Factor 55’s original shackle mount. Trusted and used by first responders worldwide, ProLink is easy to install and allows winch owne...

The ProLink is Factor 55’s original shackle mount. Trusted and used by first responders worldwide, ProLink is easy to install and allows winch owne...

The ProLink is Factor 55’s original shackle mount. Trusted and used by first responders worldwide, ProLink is easy to install and allows winch owne...

Size: 17x9.0 -25 (4 Inch Backspace) PCD: 6x139.7 Center Bore: 106.1 Color: Matte Bronze Weight: 23.5 lbs 2500lb load rating per wheel *Includes...

Size: 17x9.0 -25 (4 Inch Backspace) PCD: 6x139.7 Center Bore: 106.1 Color: Matte Black Weight: 23.5 lbs 2500lb load rating per wheel *Includ...

The Canvasback Bumper Flap attaches to the edge of your cargo liner (or edge of your rear carpet) and flaps outside of the back of the car and p...

IT'S ALL IN THE OPTICSOur patented TIR (Total Internal Reflection) optics have been re-engineered on the C2 2.0 for more intensity and more usable...

IT'S ALL IN THE OPTICSOur patented TIR (Total Internal Reflection) optics have been re-engineered on the C2 2.0 for more intensity and more usable...

TRIPLE FUNCTIONThe C2R was designed to serve as a high-power reverse light along with your factory reverse lights, a 4th brake light when your bra...

IT'S ALL IN THE OPTICSOur patented TIR (Total Internal Reflection) optics have been re-engineered on the C2 2.0 for more intensity and more usable...

IT'S ALL IN THE OPTICSOur patented TIR (Total Internal Reflection) optics have been re-engineered on the C2 2.0 for more intensity and more usable...

Heavy Duty PVC construction bag that can function as a duffel, backpack, or shoulder sling bag. In our humble opinion, the best bag on the recovery...

Introducing the NEW RotopaX 2 Gallon Diesel Exhaust Fluid Container. Same capacity and dimensions as our original 2 Gallon - without the complicate...

Olympus: Highly aggressive with the strength to match, the Lock Olympus features the most advanced tri-beam strength counter areas accompanied with...

The Retail set includes 3' feet (36") of waterproof LED strip. This Flexible strip can also be cut down into smaller sizes. A diagram is pictured...

The Inspired Overland Protective Cover shields your rooftop tent from elements and whatever the trail throws at you. Whether you’re navigating rugg...

Expand your outdoor setup with the Inspired Overland Awning Side Tent, designed to transform your awning into a fully enclosed, multifunctional spa...

Overview:The DIY Grille Kit for 3rd Gen 4Runners is a laser-cut steel grille insert that transforms the front end with optional integrated cube lig...

Overview:The Plate Front Bumper is a fully welded, high-strength steel bumper for 3rd Gen 4Runners, designed for off-road use and extreme durabilit...

Overview:This steel skid plate is designed for precise fitment on 3rd Gen 4Runners using a laser-scanned model of the front end. It offers dependab...

Overview:The Open Wing Hybrid Front Bumper DIY Kit is a weld-it-yourself high-clearance bumper for 3rd Gen 4Runners, featuring a lightweight hybrid...

Overview:The Open Wing Hybrid Front Bumper is a fully welded, high-clearance steel bumper for 3rd Gen 4Runners. Its open-wing hybrid design improve...

Overview:Upper Link Reinforcement Kit for 1996–2002 4Runner, designed to strengthen the factory upper link mounts and provide clearance for large a...

Overview:Lower Control Arm Reinforcement Kit for 1996–2002 4Runner, developed to strengthen the factory lower control arms at the ball joint end. P...

Overview:The Tire Carrier Swingout DIY Kit is designed for integration with the 1996–2002 4Runner rear bumper, providing a weld-together solution f...

Overview:The Alpha Front Bumper is a fully welded, heavy-duty steel bumper for 3rd Gen 4Runners that combines bold styling with advanced lighting i...

Overview:The Alpha Front Bumper DIY Kit is a precision-engineered, weld-together steel bumper for 3rd Gen 4Runners, built for aggressive styling an...

Overview:These 42" Curved Light Bar Brackets are built for 3rd Gen 4Runners and 1st Gen Tacomas, allowing secure roofline mounting of a curved LED ...

Overview:Weld-on Fuel Tank Relocation Mounts for 1996–2002 4Runner, engineered to support installation of an F150 auxiliary fuel tank in the rear s...

Overview:The Closed Wing Hybrid Front Bumper is a fully welded steel bumper for 3rd Gen 4Runners, built to balance strength, weight, and aggressive...

Overview:The Plate Front Bumper DIY Kit is a heavy-duty, weld-it-yourself solution for 3rd Gen 4Runners, designed for maximum strength, trail funct...

Overview:The Prerunner Front Bumper is a lightweight, race-inspired steel bumper for 3rd Gen 4Runners designed for high-speed desert and off-road u...

Overview:Heavy-duty ditch light brackets designed for 3rd Gen 4Runners and 1st Gen Tacomas. Enables mounting of pod lights along the A-pillars for ...

Overview:Strut Tower Reinforcement Kit for 1996–2002 4Runner, designed to prevent upper mount cracking under extreme compression loads. Provides st...

Overview:Lower Link Mount Reinforcement Skids for 1996–2002 4Runner, built to strengthen rear lower link brackets and accommodate high-articulation...

White water container only, mounting kit sold separately. Spout included. Made in the USA. Leak-proof and durable toto-molded water can, with thic...

8 foot flat strap can function as a tree saver or as a shorter version of our 30 foot heavy duty tow strap. Dimensions8 Foot X 3 Inch

RotopaX 5-Gallon Water Container Durable. Reliable. Built for Any Adventure. The RotopaX 5-Gallon Water Container is designed for those who need a ...

-1.75 Gallon Capacity  -10 Year Leak Free Warranty  -Spout Included -Manufactured with BPA free materials Capacity1.75 Gallon (Nearly 2G Completley...

ONE OF OUR BEST SELLERS! Black Water container only, mounting kit sold separately. Spout included. Made in the USA. Leak-proof and durable roto-mol...